STM32 HTTP Client for NUCLEO-U5A5ZJ-Q

Overview

This repository provides a board-specific .ioc file for adapting the STMicroelectronics example project st67w6x_http_client to the STM32 NUCLEO-U5A5ZJ-Q.

It is not a standalone importable project.

The source project must first be imported from the original ST example package. After that, the .ioc file from this repository should be used to replace the original one.

Important

Importing this repository directly into STM32CubeIDE may produce errors.

Correct usage

1. Import the original st67w6x_http_client project from the official ST package.
2. Replace the original .ioc file with the .ioc file provided in this repository.
3. Open the project in STM32CubeIDE / STM32CubeMX.
4. Regenerate code if needed.
5. Build and flash for NUCLEO-U5A5ZJ-Q.

What This Repository Contains

The only intended change compared to the original ST example is:

• Modified .ioc file
  • updated for STM32 NUCLEO-U5A5ZJ-Q
  • adjusted pin configuration
  • adjusted board/peripheral settings
  • updated hardware-specific configuration as needed for this target

All other project files are expected to come from the original ST example project.

How to Use

1. Get the original project

Download or open the official ST example project:

st67w6x_http_client

2. Import the original project

Import that original project into STM32CubeIDE.

3. Replace the .ioc file

Copy the .ioc file from this repository into the imported project directory, replacing the original .ioc file.

4. Open and regenerate

Open the new .ioc file in STM32CubeMX or STM32CubeIDE, then regenerate the project code if required.

5. Build and run

Build the project and flash it to the STM32 NUCLEO-U5A5ZJ-Q board.

Why This Approach Is Needed

This repository only provides the board-adapted project configuration.

Because of project structure and dependency expectations in STM32CubeIDE, importing this repository by itself can lead to missing-file or configuration errors. Using the original ST project as the base avoids those issues.

Target Board

• STM32 NUCLEO-U5A5ZJ-Q

Notes

• Application logic is based on the original ST example.
• This repository is meant to simplify porting that example to the NUCLEO-U5A5ZJ-Q.
• Tool-generated files may differ depending on your STM32CubeIDE / STM32CubeMX version.

Disclaimer

This repository is a modification aid for the official ST example project.
For full functionality, middleware, and licensing information, refer to the original STMicroelectronics package.